Utility Department
2024 Consumer Confidence Report
2024 Consumer Confidence Report for Public Water System CITY OF MART
This is your water quality report for January 1 to December 31, 2024 For more information regarding this report contact: CITY OF MART provides surface water and ground water from Mart Lake and Lake Mart Well located in Mart TX. Name _Matthew Pacheco___ Phone _254-876-2462__ Este reporte incluye información importante sobre el agua para tomar. Para asistencia en español, favor de llamar al telefono (254) 876-2462.
Definitions and AbbreviationsDefinitions and Abbreviations The following tables contain scientific terms and measures, some of which may require explanation. Action Level: The concentration of a contaminant which, if exceeded, triggers treatment or other requirements which a water system must follow. Avg: Regulatory compliance with some MCLs are based on running annual average of monthly samples. Level 1 Assessment: A Level 1 assessment is a study of the water system to identify potential problems and determine (if possible) why total coliform bacteria have been found in our water system. Level 2 Assessment: A Level 2 assessment is a very detailed study of the water system to identify potential problems and determine (if possible) why an E. coli MCL violation has occurred and/or why total coliform bacteria have been found in our water system on multiple occasions. Maximum Contaminant Level or MCL: The highest level of a contaminant that is allowed in drinking water. MCLs are set as close to the MCLGs as feasible using the best available treatment technology. Maximum Contaminant Level Goal or MCLG: The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs allow for a margin of safety. Maximum residual disinfectant level or MRDL: The highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants. Maximum residual disinfectant level goal or MRDLG: The level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants. MFL million fibers per liter (a measure of asbestos) mrem: millirems per year (a measure of radiation absorbed by the body) na: not applicable. NTU nephelometric turbidity units (a measure of turbidity) pCi/L picocuries per liter (a measure of radioactivity)
Definitions and Abbreviationsppb: micrograms per liter or parts per billion ppm: milligrams per liter or parts per million ppq parts per quadrillion, or picograms per liter (pg/L) ppt parts per trillion, or nanograms per liter (ng/L) Treatment Technique or TT: A required process intended to reduce the level of a contaminant in drinking water. Information about your Drinking WaterThe sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells. As water travels over the surface of the land or through the ground, it dissolves naturally-occurring minerals and, in some cases, radioactive material, and can pick up substances resulting from the presence of animals or from human activity.Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk. More information about contaminants and potential health effects can be obtained by calling the EPAs Safe Drinking Water Hotline at (800) 426-4791.Contaminants that may be present in source water include:- Microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock operations, and wildlife.- Inorganic contaminants, such as salts and metals, which can be naturally-occurring or result from urban storm water runoff, industrial or domestic wastewater discharges, oil and gas production, mining, or farming.- Pesticides and herbicides, which may come from a variety of sources such as agriculture, urban storm water runoff, and residential uses.- Organic chemical contaminants, including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and can also come from gas stations, urban storm water runoff, and septic systems.- Radioactive contaminants, which can be naturally-occurring or be the result of oil and gas production and mining activities.In order to ensure that tap water is safe to drink, EPA prescribes regulations which limit the amount of certain contaminants in water provided by public water systems. FDA regulations establish limits for contaminants in bottled water which must provide the same protection for public health.Contaminants may be found in drinking water that may cause taste, color, or odor problems. These types of problems are not necessarily causes for health concerns. For more information on taste, odor, or color of drinking water, please contact the system's business office.You may be more vulnerable than the general population to certain microbial contaminants, such as Cryptosporidium, in drinking water. Infants, some elderly, or immunocompromised persons such as those undergoing chemotherapy for cancer; persons who have undergone organ transplants; those who are undergoing treatment with steroids; and people with HIV/AIDS or other immune system disorders, can be particularly at risk from infections. You should seek advice about drinking water from your physician or health care providers. Additional guidelines on appropriate means to lessen the risk of infection by Cryptosporidium are available from the Safe Drinking Water Hotline (800-426-4791). If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. We are responsible for providing high quality drinking water, but we cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline or at http://www.epa.gov/safewater/lead.
Information about Source WaterTCEQ completed an assessment of your source water, and results indicate that some of our sources are susceptible to certain contaminants. The sampling requirements for your water system is based on this susceptibility and previous sample data. Any detections of these contaminants will be found in this Consumer Confidence Report. For more information on source water assessments and protection efforts at our system contact [insert water system contact][insert phone number]
Lead and Copper Date Sampled MCLG Action Level (AL) 90th Percentile # Sites Over AL Units Violation Likely Source of Contamination Copper 09/27/2023 1.3 1.3 0.1115 0 ppm N Erosion of natural deposits; Leaching from wood preservatives; Corrosion of household plumbing systems.
2024 Water Quality Test Results
2024Disinfection By-Products Collection Date Highest Level Detected Range of Individual Samples MCLG MCL Units Violation Likely Source of Contamination Haloacetic Acids (HAA5) 2024 35 20.4 - 51.2 No goal for the total 60 ppb N By-product of drinking water disinfection.*The value in the Highest Level or Average Detected column is the highest average of all HAA5 sample results collected at a location over a year
Total Trihalomethanes (TTHM) 2024 57 25.5 - 75.9 No goal for the total 80 ppb N By-product of drinking water disinfection.*The value in the Highest Level or Average Detected column is the highest average of all TTHM sample results collected at a location over a year2024Inorganic Contaminants Collection Date Highest Level Detected Range of Individual Samples MCLG MCL Units Violation Likely Source of Contamination Arsenic 2024 3 0 - 6.4 0 10 ppb N Erosion of natural deposits; Runoff from orchards; Runoff from glass and electronics production wastes. Barium 2024 0.0459 0.0459 - 0.0459 2 2 ppm N Discharge of drilling wastes; Discharge from metal refineries; Erosion of natural deposits. Cyanide 2024 140 140 - 140 200 200 ppb N Discharge from plastic and fertilizer factories; Discharge from steel/metal factories. Fluoride 2024 0.4 0.38 - 0.38 4 4.0 ppm N Erosion of natural deposits; Water additive which promotes strong teeth; Discharge from fertilizer and aluminum factories. 2024Radioactive Contaminants Collection Date Highest Level Detected Range of Individual Samples MCLG MCL Units Violation Likely Source of Contamination Beta/photon emitters 03/09/2021 5.2 5.2 - 5.2 0 50 pCi/L* N Decay of natural and man-made deposits.*EPA considers 50 pCi/L to be the level of concern for beta particles.Combined Radium 226/228 03/09/2021 1.5 1.5 - 1.5 0 5 pCi/L N Erosion of natural deposits. 2024Volatile Organic Contaminants Collection Date Highest Level Detected Range of Individual Samples MCLG MCL Units Violation Likely Source of Contamination Xylenes 2024 0.0005 0 - 0.0005 10 10 ppm N Discharge from petroleum factories; Discharge from chemical factories.
Disinfectant ResidualDisinfectant Residual Year Average Level Range of Levels Detected MRDL MRDLG Unit of Measure Violation (Y/N) Source in Drinking Water Chloramines 2024 1.6 1 – 3.5 4 4 PPM N Water additive used to control microbes.
Turbidity Level Detected Limit (Treatment Technique) Violation Likely Source of ContaminationHighest single measurement 0.37 NTU 1 NTU N Soil runoff.Lowest monthly % meeting limit 98% 0.3 NTU N Soil runoff. Information Statement: Turbidity is a measurement of the cloudiness of the water caused by suspended particles. We monitor it because it is a good indicator of water quality and the effectiveness of our filtration system and disinfectants. Lead Service Line Inventory The lead service line inventory has been completed and can be viewed upon request at City Hall.
Total Organic CarbonThe percentage of Total Organic Carbon (TOC) removal was measured each month and the system met all TOC removal requirements set, unless a TOC violation is noted in the violations section.
ViolationsPublic Notification RuleThe Public Notification Rule helps to ensure that consumers will always know if there is a problem with their drinking water. These notices immediately alert consumers if there is a serious problem with their drinking water (e.g., a boil water emergency).Violation Type Violation Begin Violation End Violation ExplanationPUBLIC NOTICE RULE LINKED TO VIOLATION 07/19/2024 2024 We failed to adequately notify you, our drinking water consumers, about a violation of the drinking water regulations.
Mandatory Language for Monitoring and Reporting ViolationSURFACE WATER MONITORING, ROUTINE MAJOR
The City of Mart, PWS ID TX1550005, has violated the monitoring and reporting requirements set by Texas Commission on Environmental Quality (TCEQ) in Title 30, Texas Administrative Code (30 TAC), Section 290, Subchapter F. Public water systems that treat surface water and/or ground water under the direct influence of surface water are required to submit monthly operating reports with operational data of the treatment, disinfection and quality of the water provided to their customers.
We failed to monitor and/or report the following constituents: Chloramine
This/These violation(s) occurred in the monitoring period(s) 05/01/2023-05/31/2023____
Results of regular monitoring are an indicator of whether or not your drinking water is safe. We did not complete all monitoring and/or reporting for surface water constituents, and therefore TCEQ cannot be sure of the safety of your drinking water during that time.
We are taking the following actions to address this issue:The City of Mart has implemented new standard operating procedures to ensure that all monitoring and reporting is conducted with accordance with all TCEQ requirements.
Please share this information with all people who drink this water, especially those who may not have received this notice directly (i.e., people in apartments, nursing homes, schools, and businesses). You can do this by posting this notice in a public place or distributing copies by hand or mail.
If you have questions regarding this matter, you may contact Matthew Pacheco at 254-876-2462.
Posted /Delivered on: 7/1/2025
This is your water quality report for January 1 to December 31, 2024 For more information regarding this report contact: CITY OF MART provides surface water and ground water from Mart Lake and Lake Mart Well located in Mart TX. Name _Matthew Pacheco___ Phone _254-876-2462__ Este reporte incluye información importante sobre el agua para tomar. Para asistencia en español, favor de llamar al telefono (254) 876-2462.
Definitions and AbbreviationsDefinitions and Abbreviations The following tables contain scientific terms and measures, some of which may require explanation. Action Level: The concentration of a contaminant which, if exceeded, triggers treatment or other requirements which a water system must follow. Avg: Regulatory compliance with some MCLs are based on running annual average of monthly samples. Level 1 Assessment: A Level 1 assessment is a study of the water system to identify potential problems and determine (if possible) why total coliform bacteria have been found in our water system. Level 2 Assessment: A Level 2 assessment is a very detailed study of the water system to identify potential problems and determine (if possible) why an E. coli MCL violation has occurred and/or why total coliform bacteria have been found in our water system on multiple occasions. Maximum Contaminant Level or MCL: The highest level of a contaminant that is allowed in drinking water. MCLs are set as close to the MCLGs as feasible using the best available treatment technology. Maximum Contaminant Level Goal or MCLG: The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs allow for a margin of safety. Maximum residual disinfectant level or MRDL: The highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants. Maximum residual disinfectant level goal or MRDLG: The level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants. MFL million fibers per liter (a measure of asbestos) mrem: millirems per year (a measure of radiation absorbed by the body) na: not applicable. NTU nephelometric turbidity units (a measure of turbidity) pCi/L picocuries per liter (a measure of radioactivity)
Definitions and Abbreviationsppb: micrograms per liter or parts per billion ppm: milligrams per liter or parts per million ppq parts per quadrillion, or picograms per liter (pg/L) ppt parts per trillion, or nanograms per liter (ng/L) Treatment Technique or TT: A required process intended to reduce the level of a contaminant in drinking water. Information about your Drinking WaterThe sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells. As water travels over the surface of the land or through the ground, it dissolves naturally-occurring minerals and, in some cases, radioactive material, and can pick up substances resulting from the presence of animals or from human activity.Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk. More information about contaminants and potential health effects can be obtained by calling the EPAs Safe Drinking Water Hotline at (800) 426-4791.Contaminants that may be present in source water include:- Microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock operations, and wildlife.- Inorganic contaminants, such as salts and metals, which can be naturally-occurring or result from urban storm water runoff, industrial or domestic wastewater discharges, oil and gas production, mining, or farming.- Pesticides and herbicides, which may come from a variety of sources such as agriculture, urban storm water runoff, and residential uses.- Organic chemical contaminants, including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and can also come from gas stations, urban storm water runoff, and septic systems.- Radioactive contaminants, which can be naturally-occurring or be the result of oil and gas production and mining activities.In order to ensure that tap water is safe to drink, EPA prescribes regulations which limit the amount of certain contaminants in water provided by public water systems. FDA regulations establish limits for contaminants in bottled water which must provide the same protection for public health.Contaminants may be found in drinking water that may cause taste, color, or odor problems. These types of problems are not necessarily causes for health concerns. For more information on taste, odor, or color of drinking water, please contact the system's business office.You may be more vulnerable than the general population to certain microbial contaminants, such as Cryptosporidium, in drinking water. Infants, some elderly, or immunocompromised persons such as those undergoing chemotherapy for cancer; persons who have undergone organ transplants; those who are undergoing treatment with steroids; and people with HIV/AIDS or other immune system disorders, can be particularly at risk from infections. You should seek advice about drinking water from your physician or health care providers. Additional guidelines on appropriate means to lessen the risk of infection by Cryptosporidium are available from the Safe Drinking Water Hotline (800-426-4791). If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. We are responsible for providing high quality drinking water, but we cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline or at http://www.epa.gov/safewater/lead.
Information about Source WaterTCEQ completed an assessment of your source water, and results indicate that some of our sources are susceptible to certain contaminants. The sampling requirements for your water system is based on this susceptibility and previous sample data. Any detections of these contaminants will be found in this Consumer Confidence Report. For more information on source water assessments and protection efforts at our system contact [insert water system contact][insert phone number]
Lead and Copper Date Sampled MCLG Action Level (AL) 90th Percentile # Sites Over AL Units Violation Likely Source of Contamination Copper 09/27/2023 1.3 1.3 0.1115 0 ppm N Erosion of natural deposits; Leaching from wood preservatives; Corrosion of household plumbing systems.
2024 Water Quality Test Results
2024Disinfection By-Products Collection Date Highest Level Detected Range of Individual Samples MCLG MCL Units Violation Likely Source of Contamination Haloacetic Acids (HAA5) 2024 35 20.4 - 51.2 No goal for the total 60 ppb N By-product of drinking water disinfection.*The value in the Highest Level or Average Detected column is the highest average of all HAA5 sample results collected at a location over a year
Total Trihalomethanes (TTHM) 2024 57 25.5 - 75.9 No goal for the total 80 ppb N By-product of drinking water disinfection.*The value in the Highest Level or Average Detected column is the highest average of all TTHM sample results collected at a location over a year2024Inorganic Contaminants Collection Date Highest Level Detected Range of Individual Samples MCLG MCL Units Violation Likely Source of Contamination Arsenic 2024 3 0 - 6.4 0 10 ppb N Erosion of natural deposits; Runoff from orchards; Runoff from glass and electronics production wastes. Barium 2024 0.0459 0.0459 - 0.0459 2 2 ppm N Discharge of drilling wastes; Discharge from metal refineries; Erosion of natural deposits. Cyanide 2024 140 140 - 140 200 200 ppb N Discharge from plastic and fertilizer factories; Discharge from steel/metal factories. Fluoride 2024 0.4 0.38 - 0.38 4 4.0 ppm N Erosion of natural deposits; Water additive which promotes strong teeth; Discharge from fertilizer and aluminum factories. 2024Radioactive Contaminants Collection Date Highest Level Detected Range of Individual Samples MCLG MCL Units Violation Likely Source of Contamination Beta/photon emitters 03/09/2021 5.2 5.2 - 5.2 0 50 pCi/L* N Decay of natural and man-made deposits.*EPA considers 50 pCi/L to be the level of concern for beta particles.Combined Radium 226/228 03/09/2021 1.5 1.5 - 1.5 0 5 pCi/L N Erosion of natural deposits. 2024Volatile Organic Contaminants Collection Date Highest Level Detected Range of Individual Samples MCLG MCL Units Violation Likely Source of Contamination Xylenes 2024 0.0005 0 - 0.0005 10 10 ppm N Discharge from petroleum factories; Discharge from chemical factories.
Disinfectant ResidualDisinfectant Residual Year Average Level Range of Levels Detected MRDL MRDLG Unit of Measure Violation (Y/N) Source in Drinking Water Chloramines 2024 1.6 1 – 3.5 4 4 PPM N Water additive used to control microbes.
Turbidity Level Detected Limit (Treatment Technique) Violation Likely Source of ContaminationHighest single measurement 0.37 NTU 1 NTU N Soil runoff.Lowest monthly % meeting limit 98% 0.3 NTU N Soil runoff. Information Statement: Turbidity is a measurement of the cloudiness of the water caused by suspended particles. We monitor it because it is a good indicator of water quality and the effectiveness of our filtration system and disinfectants. Lead Service Line Inventory The lead service line inventory has been completed and can be viewed upon request at City Hall.
Total Organic CarbonThe percentage of Total Organic Carbon (TOC) removal was measured each month and the system met all TOC removal requirements set, unless a TOC violation is noted in the violations section.
ViolationsPublic Notification RuleThe Public Notification Rule helps to ensure that consumers will always know if there is a problem with their drinking water. These notices immediately alert consumers if there is a serious problem with their drinking water (e.g., a boil water emergency).Violation Type Violation Begin Violation End Violation ExplanationPUBLIC NOTICE RULE LINKED TO VIOLATION 07/19/2024 2024 We failed to adequately notify you, our drinking water consumers, about a violation of the drinking water regulations.
Mandatory Language for Monitoring and Reporting ViolationSURFACE WATER MONITORING, ROUTINE MAJOR
The City of Mart, PWS ID TX1550005, has violated the monitoring and reporting requirements set by Texas Commission on Environmental Quality (TCEQ) in Title 30, Texas Administrative Code (30 TAC), Section 290, Subchapter F. Public water systems that treat surface water and/or ground water under the direct influence of surface water are required to submit monthly operating reports with operational data of the treatment, disinfection and quality of the water provided to their customers.
We failed to monitor and/or report the following constituents: Chloramine
This/These violation(s) occurred in the monitoring period(s) 05/01/2023-05/31/2023____
Results of regular monitoring are an indicator of whether or not your drinking water is safe. We did not complete all monitoring and/or reporting for surface water constituents, and therefore TCEQ cannot be sure of the safety of your drinking water during that time.
We are taking the following actions to address this issue:The City of Mart has implemented new standard operating procedures to ensure that all monitoring and reporting is conducted with accordance with all TCEQ requirements.
Please share this information with all people who drink this water, especially those who may not have received this notice directly (i.e., people in apartments, nursing homes, schools, and businesses). You can do this by posting this notice in a public place or distributing copies by hand or mail.
If you have questions regarding this matter, you may contact Matthew Pacheco at 254-876-2462.
Posted /Delivered on: 7/1/2025